CCNA – STATIC NAT – Part – 3

0

STATIC NAT

Configure NAT. Translate Server IP address 10.0.0.2 to 50.0.0.1. Inside local to Inside global.Static NAT also called inbound mapping, is the process of mapping an unregistered IP address to a registered IP address on a one-to-one basis.

NAT1

router1#config t
router1(config)#int fastEthernet 0/0
router1(config-if)#ip address 10.0.0.1 255.0.0.0
router1(config-if)#no shut
router1(config-if)#exit
router1(config)#int serial 2/0
router1(config-if)#clock rate 64000
router1(config-if)#bandwidth 64
router1(config-if)#ip address 20.0.0.2 255.0.0.0
router1(config-if)#no shut
router1(config-if)#exit
router1(config)#ip route 30.0.0.0 255.0.0.0 20.0.0.1
router1(config)#ip nat inside source static 10.0.0.2  50.0.0.1
router1(config)#int fastEthernet 0/0
router1(config-if)#ip nat inside
router1(config-if)#exit
router1(config)#int serial 0/0
router1(config)#ip nat outside
router1(config)#exit

Share.

About Author

Chakraborty Prijus

Former Asst. Manager (IT) - MGH Group MCA (Masters in Computer Application) From Sikkim Manipal University India. Have 5 years experience In IT field.

Leave A Reply

Powered by themekiller.com