Idea of Cisco IOS command-line interface-(Part-4)

0

Dear Viewers,

Today we are discuss  copy features. This information is very important cisco router CLI platform. So, buildup your idea……………….

COPY (copies configuration information to specified location );when a configuration is copy into RAM from ANY SOURCE ,it is merged.If a configuration file is being copied into NVRAM or a TFTP server,it is copied.

COPY RUNNING-CONFIGURATION STARTUP-CONFIGURATION or WRITE MEMORY;saves the current configuration to NVRAM.

COPY RUNNING STARTUP;copies configuration from RAM to NVRAM.

COPY STARTUP RUNNING; merges configuration from NVRAM TO RAM.

COPY TFTP RUN ;merges configuration from TFTP to RAM.

COPY TFTP START;copies configuration from TFTP to NVRAM.

COPY RUN TFTP; copies configuration from RAM to TFTP.You will need to copy a router’s configuration to a TFTP server if it is larger than 32,000 bytes,which is the largest configuration that can fit into RAM.

COPY START TFTP; copies configuration from NVRAM to TFTP.

COPY FLASH TFTP;copies current IOS from router flash memory to network server.

COPY TFTP FLASH;copies image file from TFTP server to flash.This is used to upgrade the IOS image file to a newer version,or if your IOS  image becomes corrupt.

                                                                                               (Continue)——————- Thanks Everyone

Share.

About Author

TN365

Leave A Reply

Powered by themekiller.com